If your phone says “No command,” it means you can’t do what you were trying to do because you don’t have the right information or you don’t have the right tool. If you don’t know what to do, you can usually find instructions online or in the manual that came with your phone.
For starters
When you are trying to use a command on your phone and it doesn’t work, there are a few things that you can do. The first thing you can try is to try a different command. If you’re still not getting the result that you want, you can try to troubleshoot the problem. If everything else has failed, you can try to reset your phone.
How Do I Fix My Phone When It Says No Command
-
Restart your Android phone.
-
Boot into Recovery Mode.
-
Wipe the cache partition.
-
Reset your Android device to factory settings.
-
If the issue persists, try a different command.
-
If all else fails, restart your Android phone and call customer service.
How Do You Reset a Nokia Phone When Its Locked No Command
When your phone is locked, you need to turn it off and then connect it to a PC or a charger. You need to wait until the battery sign appears, and then hold the Power + Volume Up buttons until the phone vibrates. You need to release the Power button, but keep holding Volume Up until an Android robot appears. You need to enter your pin number and then press the OK button.
What Does No Command on Samsung Mean
After an Android update, some phone commands may not work. This is called a ‘No Command’ on Android. Sometimes, the phone may be able to find other commands, but not this one. This can be frustrating, because you may have expected the phone to work the way it always has.
Why My Recovery Mode Is Not Working
When Android OS updating or phone resetting, the Superuser access may have been denied or terminated. This can cause recovery mode not working.
Does Recovery Mode Delete Everything
-
Recovery mode does not delete everything on the device.
-
There is an option to enable deletion of everything in recovery mode.
-
This option is available if you are having problems and need to reset the device to factory settings.
-
Deleting everything will erase all of your data on the device.
-
Before you delete everything, be sure to back up your data.
-
You should only use this option if you are having problems and need to reset the device to factory settings.
-
Be sure to know what you are doing before you delete everything.
How Do You Reset a Locked Android Phone
If you have a locked phone, you can unlock it by following these steps:
-
Turn your phone off and hold the volume down and power buttons together until the Sony screen displays.
-
Release the buttons and you will see a system Recovery screen.
-
Use the Volume keys as up and down arrow keys to navigate in the menu.
-
Choose Factory Reset and use the power button to select it.
-
After the reset is complete, your phone will restart.
How Do I Fix My Android It Wont Boot Into Recovery
If your Android telephone won’t boot into recovery, try the following steps:
-
Wipe stored caches to fix temporary system glitches.
-
Reset your Android phone.
-
Install system updates from ADB or SD card.
-
Run hardware tests.
-
Reboot to bootloader.
-
Enter fast boot.
-
Fix your Android telephone by entering recovery mode and performing the necessary repairs.
How Do I Exit Fastboot Mode
If you are in Fastboot mode and you want to exit, you can press and hold down the Power button to reboot your phone. When your phone powers off, press and hold down the Power key again and your phone will turn on. You should now be out of Fastboot mode.
How Do You Flash a Locked Phone
To flash a locked phone, you’ll need to download the flash tool, USB drivers, and the Android phone’s firmware. You’ll also need to turn off your Android phone before proceeding.
To open the Flash tool, switch off your Android phone and connect it to your computer using the included USB drivers. The Flash tool will then start to install the drivers.
Once the drivers have been installed, open the Flash tool. Switch on your Android phone and wait for it to recognise. Once it has, click on the flashing button. The Flash tool will then start to flash the firmware onto your Android phone.
Once the firmware has been flashed, turn off your Android phone and disconnect it from your computer. Your phone should now be unlocked.
All in all
If you don’t have the right information or the right tool, you can usually find instructions online or in the manual that came with your phone.
